Xerox Color C75 Press Manual

Xerox Color C75 Press Manual

This Xerox Color C75 machine is a copier in full color and in black and white and a network printer that operates at a speed of 75 copies/prints per minute. Large capacity 2 trays (OHCF) optional feeder is shown. Other optional power supply devices are available. The user interface (UI) consists of the touch screen and the control panel with buttons and keyboard. It automatically feeds 1 and 2-sided original documents. A maximum of 250 documents double-sided you can scan at the same time. Open this cover to access and replace the toner/dry ink cartridges. Open this door/cover to remove paper jams and to replace several replaceable units (CRUs) customer. Trays 1, 2 and 3 are identical. Trays accommodate a variety of sizes and weights; See specifications for more details. All types of stock, except the envelopes, can be and stocks in the direction of feed (LEF) long edge or short edge (SEF) power can be loaded. The interface module is required with many optional finishing devices. It serves as a communication device between the print engine and any finish attachment device. Shows the optional Finisher Booklet Maker with the folder C / Z, optional. The Booklet Maker finisher interface module is required. Other optional finishing devices are available.

The Bypass Tray, also called tray 5 or Multi-sheet Inserter, accommodates all types of stocks in different sizes and weight ranges. The tray holds up to 250 sheets of 20 lb plain paper / 75 g / m2. The Bypass Tray is a paper tray on the left side of the machine. You can fold up when not in use. When the tray is in use and is lowered, the tray can be extended to support long stock. The Bypass Tray mounting location varies when optional power devices are added to the configuration of the machine. Suggestions for the use of the automatic document feeder (DADF) duplex: you can scan a maximum of 250 documents at a time using the document feeder. They can be used mixed size originals; However, the upper left corners of the original documents should be aligned in the document handler. Remove staples and documents paper clips before loading them into the document feeder. For a better output, make sure that the documents are in good condition.

The energy-saving and energy-saving terms are used synonymously. Energy saving function has two modes: low-power: after staying idle for a preset time period, the machine enters the low power mode. Sleep mode: after entering low-power and remain idle for another period of preset time, the machine will enter sleep mode. Here are two examples: If the low power mode is set to 15 minutes and standby is set to 60 minutes, the sleep mode is activated after 60 minutes of total inactivity and not 60 minutes after starting low-power mode. If the low power mode is set to 15 minutes and standby is set in 20 minutes, standby is activated 5 minutes after the start of the low-power mode. To manually enter the energy saving, press the Energy Saver button in the user interface.

The AdvancedPunch GBC provides another level of finishing options to its output, allowing you to drill holes in documents of 8.5 x 11 inch / A4, supporting a variety of binding styles. Types of drilling include 19 holes to a maximum of 32 holes for 8.5 x 11-inch media. The A4 support supports 21 holes drilling up to a maximum of 47 holes. The AdvancedPunch GBC is shown here with the required interface module and the Booklet Maker finisher optional and the folder C / Z, optional. Information about this accessory you can download from www.xerox.com download the most recent version of the desired user's Guide by entering the product name in the search field and then selecting the link user documentation.

Download Xerox Color C75 Press Manual PDF

Tweet